TP200 Double-Sided Tube Printer
TP200 is a double-sided tube printer for wire and cable marking. It is one of the two tube printer models on this site with a documented specification listing, and the specifications below are reproduced from that listing. Double-sided printing here means the printer prints on both sides as stated in the listing; the listing does not describe a second print head or a duplex mechanism, so none is described here.
Specifications as listed
| Item | Listed specification |
|---|---|
| Print method | Thermal transfer, double-sided |
| Print resolution | 300DPI |
| Print speed | 25mm/s |
| Effective print height | 8mm |
| Segment length range | 6–100.0 (as listed; the unit was not fully shown in the source listing, so no unit is added here) |
Where TP200 fits
Within the tube printer category, TP200 sits alongside TP86A as the two models with published specifications. The other TP models, the CT series and MT01 are listed by model name only on the tube printer category page, and TP200's figures are not applied to them. Buyers comparing tube printers should use the tube printer buying guide, which keeps the comparison at model-name level for models without a specification listing.
Consumables and use
TP200 prints on tubes and sleeves for wire and cable identification. Matching consumables are listed on the tube printer accessories page and the cable identification consumables page. When you inquire, state the tube or sleeve type and size you print on, so the consumable match can be confirmed for TP200 specifically.
What the listing does not state
The listing reproduced here does not state a price, an MOQ, a lead time, or a warranty term, and none is added on this page. The segment length unit is reproduced exactly as listed, without completing a unit the source did not fully show.
How this model compares with the rest of its line
Every model on this site sits in one of two groups: models with a documented specification listing, and models listed by model name with a category anchor. This model belongs to the first group, and the figures on this page describe this model only. When you compare it with another model in the same series or category, check whether that other model also carries a documented listing. If it does, compare the two listings directly. If it does not, do not carry any figure from this page across to it, and do not build a comparison table that mixes documented figures with assumed ones. The category page for this model lists the whole line with each model's status, and the buying guide for the category keeps the comparison at the level the source material supports. That discipline is what keeps a comparison honest: a figure that is documented for one model is evidence for that model, and for no other.
Ordering checklist for this model
When you order this model, state its full name exactly as listed, including any variant tag, and state the quantity. State the consumable type and size you will use with it, and confirm that the consumable is stated to fit this model or its series. State the certificates you need, if any, and name the documents rather than assuming them. Then confirm, for this model and for each consumable, the specification, the MOQ, the lead time, and the price, and confirm them in writing before payment. If any of those figures is missing from the listing on this page, that absence is itself information: it means the figure must be asked for, not assumed, and the inquiry is the place to ask.
Before you order
Confirm the exact model and variant, the specifications above, the consumable match, the MOQ, the lead time, and the price for each item before placing an order — see the inquiry confirmation page. Certificates are available upon request. Full street address is not published on this site; use the contact form, the pre-sales number, or the site email.
Related pages: Tube Printers, TP86A High Speed Tube Printer, Tube Printer Buying Guide.
Quote my tube & label run: Tell us the printer model, the tube or label size, and the quantity. Before you pay, confirm the model, specifications, MOQ, lead time, and price for each item — see our inquiry confirmation page.