T80 Pro Label Maker
T80 Pro is a label maker in the T series of thermal label printers. It is the only T series model on this site with a documented specification listing; T80 Pro+, T80S, T50 Pro, T50 Plus, T10 Pro, T10 and T50S are listed by model name only on the T series category page. The specifications below are reproduced from the T80 Pro listing. T80 MAX is a separate model and is not merged into this page, and T80 Pro+ is a different model from T80 Pro.
Specifications as listed
| Item | Listed specification |
|---|---|
| Print speed | 10~45mm/s |
| Effective print width | 72mm |
| Consumable types | Gap labels, black-mark labels, black-mark card stock, two-colour thermal paper |
| Battery | 1500mAh |
| Full-charge printing | 80–100m (12.5% print density) |
| Dimensions (length x width x height) | 124mm x 110mm x 64 (as listed; the unit was not fully shown in the source listing, so no unit is added here) |
| Protection rating | IP54 |
| Standard package (as listed) | Label maker, charging cable, manual |
| Software | Supvan PC universal editing software 2.4.24 (applies to G series / LP series / MP series / BP series / LCP series / T50S / Pro / MAX / T80S / Pro / MAX, as listed) |
Where T80 Pro fits
Within the T series, T80 Pro is the model with a published specification listing, alongside price tag printers, office label printers and other thermal models listed by model name only. Its speed range, width and battery figures describe T80 Pro only. For the difference between thermal transfer and direct thermal printing, see the technology comparison, which uses general technical wording and does not bind any performance figure to an undocumented model.
What the listing does not state
The listing reproduced here does not state a price, an MOQ, a lead time, or a warranty term, and none is added on this page. The dimension unit is reproduced exactly as listed.
How this model compares with the rest of its line
Every model on this site sits in one of two groups: models with a documented specification listing, and models listed by model name with a category anchor. This model belongs to the first group, and the figures on this page describe this model only. When you compare it with another model in the same series or category, check whether that other model also carries a documented listing. If it does, compare the two listings directly. If it does not, do not carry any figure from this page across to it, and do not build a comparison table that mixes documented figures with assumed ones. The category page for this model lists the whole line with each model's status, and the buying guide for the category keeps the comparison at the level the source material supports. That discipline is what keeps a comparison honest: a figure that is documented for one model is evidence for that model, and for no other.
Ordering checklist for this model
When you order this model, state its full name exactly as listed, including any variant tag, and state the quantity. State the consumable type and size you will use with it, and confirm that the consumable is stated to fit this model or its series. State the certificates you need, if any, and name the documents rather than assuming them. Then confirm, for this model and for each consumable, the specification, the MOQ, the lead time, and the price, and confirm them in writing before payment. If any of those figures is missing from the listing on this page, that absence is itself information: it means the figure must be asked for, not assumed, and the inquiry is the place to ask.
Before you order
Confirm the exact model and variant, the specifications above, the consumable match, the MOQ, the lead time, and the price for each item before placing an order — see the inquiry confirmation page. Certificates are available upon request. Full street address is not published on this site; use the contact form, the pre-sales number, or the site email.
Related pages: T Series Thermal Label Printers, Thermal Transfer vs Direct Thermal, Label Tapes & Ribbons.
Quote my tube & label run: Tell us the printer model, the tube or label size, and the quantity. Before you pay, confirm the model, specifications, MOQ, lead time, and price for each item — see our inquiry confirmation page.