LP5125BT Handheld Bluetooth Label Maker
LP5125BT is a handheld Bluetooth label maker in the LP series of laminated printers. It is the only LP series model on this site with a documented specification listing; LP6245E, LP6245C, LP5125, LP5125BT Plus and LP5125B are listed by model name only on the LP series category page. The specifications below are reproduced from the LP5125BT listing.
Specifications as listed
| Item | Listed specification |
|---|---|
| Model | LP5125BT |
| Control method | Not fully shown in the source listing; not stated here |
| Print speed | 15mm/s |
| Effective print height | 9mm |
| Consumable types | Laminated labels, strong-adhesion labels, cable labels |
| Consumable widths | 6 / 9 / 12mm |
| Cutting method | Not stated: the source listing did not fully capture it, so no cutting method is written on this page |
| Applicable consumables note (as listed) | Stated to apply to the LP series, H series and G10 (the listing does not explain what the H series refers to, so no explanation is added here) |
Where LP5125BT fits
Within the LP series, LP5125BT is the Bluetooth handheld model with a published specification listing. Its consumable widths and types describe LP5125BT only and are not applied to the other LP models. The consumable note above is reproduced exactly as listed: it names the LP series, the H series and G10, and this site does not expand that note into a claim about any other series.
What the listing does not state
The listing reproduced here does not state a price, an MOQ, a lead time, a warranty term, or a cutting method, and none is added on this page.
How this model compares with the rest of its line
Every model on this site sits in one of two groups: models with a documented specification listing, and models listed by model name with a category anchor. This model belongs to the first group, and the figures on this page describe this model only. When you compare it with another model in the same series or category, check whether that other model also carries a documented listing. If it does, compare the two listings directly. If it does not, do not carry any figure from this page across to it, and do not build a comparison table that mixes documented figures with assumed ones. The category page for this model lists the whole line with each model's status, and the buying guide for the category keeps the comparison at the level the source material supports. That discipline is what keeps a comparison honest: a figure that is documented for one model is evidence for that model, and for no other.
Ordering checklist for this model
When you order this model, state its full name exactly as listed, including any variant tag, and state the quantity. State the consumable type and size you will use with it, and confirm that the consumable is stated to fit this model or its series. State the certificates you need, if any, and name the documents rather than assuming them. Then confirm, for this model and for each consumable, the specification, the MOQ, the lead time, and the price, and confirm them in writing before payment. If any of those figures is missing from the listing on this page, that absence is itself information: it means the figure must be asked for, not assumed, and the inquiry is the place to ask.
Before you order
Confirm the exact model and variant, the specifications above, the consumable match, the MOQ, the lead time, and the price for each item before placing an order — see the inquiry confirmation page. Certificates are available upon request. Full street address is not published on this site; use the contact form, the pre-sales number, or the site email.
Related pages: LP Series Laminated Printers, Label Tapes & Ribbons, Ribbon & Tape Compatibility Guide.
Quote my tube & label run: Tell us the printer model, the tube or label size, and the quantity. Before you pay, confirm the model, specifications, MOQ, lead time, and price for each item — see our inquiry confirmation page.